The set consists of the following cables and adapters:
- Abrites main connector cable - DB25 cable with multiple banana connectors - Connects to the DB25 connector on the AVDI and allows you to connect to the rest of the cables provided as a part of our solution system;
- Abrites fuse plug - cable with one fuse plug and two banana connectors - used to connect to the ignition fuse of the car (if one is available) in order to be used with the Abrites switch relay cable;
- Abrites switch relay cable - cable with banana connectors and fuse relay - together with the Abrites fuse plug, used to increase the speed of the password extraction process 10 times;
- Abrites CAN H (High), CAN L (Low) Connectors - cable with two banana connectors and two connector needles - made to connect to the Abrites Mercedes Main Cable to perform virginization and module adaptation for ECUs, ISMs, etc.;
- Abrites LIN Connector - single cable with 1 banana connector and one connector needle - this cable is used together with the main cable to connect the K- line to PIN 7 of the OBD as per the DAS manager instructions;
- OBDII Y-connector - OBDII Cable that splits into 1 x F OBDII connector and 1 x M DB25 connector;
- 3-way D-SUB 25 connection box - 2 x M DB25 connectors and 1 x F DB25 connector.
