Abrites Diagnostics for VAG version 35.0
- Reading the PIN/CS from Magneti Marelli 9GV engine control unit (requires DSBox). A new function for the new Magneti Marelli 9GV ECUs, the ECUs are now supported for adaptation and PIN/CS extraction. New special function VN012 is required
- MED 17.5.21/MED17.5.24 PIN/CS decoding. This will allow the adaptation of these ECUs using IMMO parts adaptation or IMMO V adaptation depending on what car they are installed in. Free for all customers with a ASSIST PLAN and VN004
- EDC17C74/EDC17CP54 immo off. Allows the immobilizer part of the ECU to be turned off so that we can move the car to a workshop where we can perform adaptation. Free for all customers with a ASSIST PLAN and VN004
- EDC17C74/EDC17CP54 flash checksum calculation. Very helpful for chiptuners allowing us to change the map inside the flash and recalculate the checksum for the ECU so that it functions correctly. Free for all customers with a ASSIST PLAN and VN004
- VW UP! 2015/2016/2017 - Added new version for key-learning. The latest VW UP! came with a new transponder system which was not covered in the previous versions. Free for all customers with a ASSIST PLAN and VN003
- Read/write immobilizer data for VDO MQB dashboards by OBDII (working key is required) NEW LICENSE VN014 is required for this option.
- Improved Kessy decoding (Audi A8/Touareg/Phaethon/Bentley 2003-2010) - for the cases where the production year of the Kessy is about 2006/2007. We can now assist in the adaptation and key programming in the cases where there is a mismatch of the KESSY and the car. Free for all customers with a ASSIST PLAN and VN003
