Mercedes/Maybach/Smart 11.11
- MN031 - DAS Manager For Mercedes-Benz Trucks
Login for pricingSupported vehicles:Trucks- Mercedes-Benz Actros
- Mercedes-Benz Arocs
- Mercedes-Benz Antos
- (and other models from the truck range with IR keys)
Buses- Mercedes-Benz Travego
- Mercedes-Benz Tourismo 3rd Generation
- Setra with Infrared keys
Setra buses include:- Setra 511 HD (ComfortClass 500)
- Setra 515 HD (ComfortClass 500)
- Setra 515 MD (ComfortClass 500)
- Setra 516 HD (ComfortClass 500)
- Setra 516 HD/2 (ComfortClass 500)
- Setra 516 MD (ComfortClass 500)
- Setra 517 HD (ComfortClass 500)
- Setra 519 HD (ComfortClass 500)
- Setra 515 HDH (TopClass 500)
- Setra 516 HDH (TopClass 500)
- Setra 517 HDH (TopClass 500)
- Setra 531 DT (TopClass 500)
- (and other models from the buses range with IR keys)
Learn More - ZN030 - ABPROG
Login for pricingThis programmer works together with AVDI interface. With the help of this programmer you can :
- For NEC MCU's assembled in the MERCEDES IR-Keys - Read the SSID of the key, Erase the NEC chip and then program it again
- With adapter ZN031 for M35xxx/SPI/I2C Adapter together with Abrites EEPROM Programmer software allows you to erase and write SPI EEPROM memory with and without incremental registers:
- M35080VP
- M35080V6
- D080D0WQ
- D160D0WQ
- M95080
- M95160
- M95320
- M95640
- M95128
- ТА69 - ABRITES infra-red Key for Mercedes-Benz Trucks
Login for pricing- Mercedes-Benz Actros
- Mercedes-Benz Arocs
- Mercedes-Benz Antos
- Other models of the Mercedes-Benz truck range
Learn More - ZN032 ABPROG NEC Ziff adapter
Login for pricingThe adapter is intended for ABPROG programmer ZN030 to be used with NEC MCUs from Mercedes IR-keys.
Learn More - ZN036 IR AVDI Cable
Login for pricingCable for reading data from EIS through Infra Red
Works with special functtion MN026
Inc 30pin adaptor
Learn More - ZN051 ABRITES Distribution Box
Login for pricingABRITES Distribution Box (ZN051) is an assisting tool, designed to work with AVDI interface and ABRITES diagnostic software for reading ECUs by direct connection and boot mode.
The Distribution Box is convenient for working both on bench and in the car. It can be used to connect to CAN and K-Line, as well as provide ground and power (12V) from external power supply. ZN051 has a set of cables and pins used to connect to different modules, in order to virginise, personalise and activate these modules.
The tool also has a fuse relay incorporated, allowing fast password extraction from Mercedes-Benz vehicles.
Learn More - CB011 - ABRITES MB cable for EZS, 7G Tronic and ISM/DSM
Login for pricingSupported modules:- EZS (EIS) - electronic starter switch in the following:
- W117/W156/W166
- W164
- W207
- W204
- W212
- W221
Learn More- 7G Tronic gearbox
- ISM/SDM module
- ZGW
- Instrument cluster
- CB013 - MSD/MSV bench connection cable set
Login for pricingSupported brands:
- BMW
- Peugeot
- Citroën
- other PSA-based platforms
Supported BMW ECUs include:
- MSD80
- MSD81
- MSD82
- MSV81
- MSV82
- (not used with MSV80 ECUs as the ISN is read by OBDII for it)
Supported PSA ECUs include:
- All Engine Control Units 2001-2021+
ABRITES Diagnostics for Mercedes is a Windows PC based professional diagnostic software. This Commander (with the AVDI) allows you to perform complete diagnostics of all 1995-present Mercedes Benz models. t provides some unique functions, which are not supported by any other diagnostic tool.
Diagnostics are performed via the OBD-II connector or via Mercedes-Benz proprietary 38-pin connector (only older cars, pre-2001), or via Mercedes-Benz proprietary 14-pin connector. Our PC USB diagnostic interface supports over 26 multiplexed K-Lines and Mercedes-Benz diagnostics CAN-BUS interface (also known as CAN-D).
Standard Diagnostic Functions:
Scanning for control units / Clearing fault codes in all control units
Reset of control unit
Adjustment of injector injection quantities adaptation for Diesel Engines (CDI-4, CDI-5)
