Dashboard Calibration via Internal CAN for New Nissan Vehicles Now Available! New NN011 License!
The only software solution, offering
* Mileage calibration for Nissan 2019+ models via internal CAN
* NO need to open or cut the ABS module
* NO need for filters
This dashboard calibration license ensures an easy and simple procedure when it comes to calibrating mileage values in Nissan vehicles after 2019. See supported models below!
Supported models:
* Nissan Juke F16 2019-2023 (Analogue)
* Nissan Qashqai J12 2020-2023 (Analogue + Virtual)
* Nissan X-Trail/Rogue T33 2020-2023 (Analogue + Virtual)
* Nissan Sentra B18 2020+ (Analogue)
* Nissan Skyline 2021+ (Analogue)
* Mitsubishi Outlander 2020-2023 (Analogue + Virtual)
* other models with the same dashboards (equipped with S6J329, S6J328, S6J332, S6J32L MCUs)
The NN011 not only allows you to easily calibrate the mileage value of the dashboard, it also blocks the synchronisation with the ABS module, eliminating the need to cut or open it. This makes the calibration procedure effortless, in comparison to all other solutions on the market.
How it’s done:
1. Connect to the BCM’s CAN H and CAN L (see user manual)
2. Open the software and select the make and model of the car
3. Press the “Mileage” button and read the dashboard
4. Click on the current value and put in the correct one
5. Press the “Update the instrument cluster and disable ABS sync” button (one-click operation!)
After connecting to the CAN H and CAN L of the car’s BCM, the procedure takes around 9 minutes. Make sure to wait it out, then simply update the IC and disable the synchronisation with the ABS module. It’s that simple!
GET NN011
Required:
* AVDI
* CB012 cable for internal CAN-BUS connection
* NN011 license
