How to Add a Spare Key to BMW F-Series and G-Series Vehicles
Check out the latest video showing the full procedure on bench using the software.
Watch the video: https://youtu.be/lq1EoadazJw
Step-by-Step Instructions:
- Remove the BDC2 module from the car and open it to access the PCB.
- Connect the ZN095 cable (bench connection) to the PCB.
- Use the software: go to Keys & Start Synchronization menu.
- Read the BDC2 data (4 files) and save them.
- Load the saved data back to the module.
- Read the working key’s data.
- Write the data to the new key when prompted.
- Reassemble and reinstall the module in the car.
- Hold the new key to the ring aerial and turn on ignition.
Tools & Licenses Required:
- Key programming license for BMW G-Series and F-Series BDC2 vehicles — BN020 License
- AVDI Basic Hardware
- ZN003 PROTAG
- ZN151 Distribution Box
- ZN095 BDC2 Cable
- Annual Subscription (AMS)
Learn More
Visit www.kapdiagnostics.com for full specifications and tools.
