MN034 - FBS4 Personalisation Expert
Overview
FBS4 Expert
Login for pricing
In stock
Details
The MN034 FBS4 Personalisation Expert license allows personalisation of all virgin FBS4 modules. MN034 allows reading FBS4 data via OBD (or internal CAN-Bus connection) and personalization with or without available FBS4 data.
This is a major tool for working with modules from the FBS4-generation Mercedes-Benz vehicles. The MN032 DAS Manager for FBS4 vehicles license is required to use the MN034!
Functionalities:
Reading FBS4 data from ALL types of modules via OBD (or internal CAN-Bus connection)
Personalisation with or without available FBS4 data from previous modules by internal CAN-Bus connection
Personalisation of brand-new and unused VGS4-0 NAG2 and VGS4-500 NAG2 transmission control units WITHOUT the need to set them to virgin state!
Supported modules:
VGS4-NAG2 (0 and 500)
(DSM is used. Longitudinal engine config)
- Read FBS4 data via OBD: No need to open or cut the module!
- Personalisation via internal CAN-Bus connection (using FBS4 data from the previous module)
- Personalisation of new and unused via internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
VGS-FDCT/VGS2-FDCT (FBS4)
(Installed in transverse engine configurations)
- Reading and writing FBS4 data via OBD or internal CAN-Bus connection
- Personalization via internal CAN-Bus connection
- Personalisation of new and unused via internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
VGS NAG3 (9G-Tronic transmission control units)
(No DSM used. Longitudinal engine config)
- Reading FBS4 data via OBD or internal CAN-Bus connection
- Personalization via internal CAN-Bus connection
- Personalization of new and unused via internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
GT-DCT - AMG GT/AM Vantage (Transaxle config)
- Reading FBS4 data via OBD or internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
8 DCT (transverse engine config A- class and derivatives)
- Reading FBS4 data by OBD or internal CAN-Bus connection
- Personalisation
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
For ALL Engine modules:
- Reading FBS4 data by OBD or internal CAN-Bus connection (MN032 required!)
- Personalization for ALL ECU types by OBD or internal CAN-Bus connection! (Extended or Standard personalization)
- Personalisation of MED17, EDC17, and CRD3 ECUs when NO PREVIOUS PERSONALISATION DATA IS AVAILABLE!
- Setting to virgin state by OBD (MN032 required!)
MED17, EDC17, SID310, CRD3 ECUs (CR40, CR41, CR42, CR43, CR6, CR60, CR61, MED40, MED177, MED1773, MED1775, CRR1, CRR1+, CRD3, CRD3S2)
- Setting to virgin state via ABRITES Distribution Box Set (ZN151) - required for
MED41, MRD1, MRG1, CRR2 up to 2021 (MN032 required!)
Hybrid vehicle ECUs (INV20EM01 and derivatives)
- Reading FBS4 data by OBD or internal CAN-Bus connection (MN032 required!)
- Setting to virgin state via OBD or internal CAN-Bus connection – No need to open the module! (MN032 required!)
- Personalisation by OBD or internal CAN-Bus connection (Extended or Standard personalisation)
Electric vehicle ECUs (EM01, EM02)
- Reading FBS4 data by OBD or internal CAN-Bus connection (MN032 required!)
- Personalisation by OBD or internal CAN-Bus connection (Extended or Standard personalisation)
DSM (all types of models) installed in VGS4-NAG2 (7G) cars
- Reading and writing FBS4 data via internal CAN-Bus connection
- Setting to virgin state via internal CAN-Bus connection – No need to open the module! (MN032 required!)
- Personalization via internal CAN-Bus connection – No need to open the module! (MN032 required!)
- Personalization WITHOUT available FBS4 data from previous the module via ABPROG
Required hardware:
AVDI – essential in order to use all ABRITES-based products and establish OBD connection
ABRITES Distribution Box Set (ZN151) – required for setting selected modules to virgin state
ABPROG or SET088 – required for setting VGS4-0 NAG2 and VGS4-500 NAG2 modules to virgin state and personalising them without available FBS4 data from previously used module.
DSM/ISM Direct CAN BUS Connection Cable (CB034) – required for reading, setting a used module to virgin state, and writing data onto it
Mercedes-Benz MD1/MG1 ECU connection cable for FBS4 Manager and ECU Programming Tool (CB030)
Extended Cable Set for all TCUs which require bench connection (CB403) – for owners of the ZN051 (older iteration of the Distribution Box Set)