Ford 7.1

 ABRITES Diagnostics for Ford is a software for diagnostics of Ford and Mazda vehicles over CAN bus. It provides abilities for IN code calculations, key programming and cluster calibration.

Standard diagnostic functions:

For all electronic control units reading identification data

For all electronic control units read error (DTCs)

 For all electronic control units clear error (DTCs)

Device scan

Data Display / Measured values

Fuel Injector Correction Factors

Speed Limiter - Modify dealer set speed on Ford Transit MK6(2000-2006) and MK7(2006+)

Set RPM Controller mode and associated engine speed - Ford Transit MK6(2000-2006) and MK7(2006+)

Programmable Module Installation - With PMI you can safety to replace original ECU with used or new one. PMI transfers internal data from original ECU to replacement one. If original ECU is not available, you can obtain data from Ford Global database.

Ford/Mazda PCM Read/Write flash memory:
- EDC16C3 - 1.4/1.6 TDCI
- EDC16C34 - 1.4/1.6 TDCI
- SID804 - 1.8/2.0 TDCI
- SID206 - 1.8/2.0 TDCI
- Denso 1MB - Mazda 5/6 - 2.0D

Service functions:
Reset The Powertrain COntrol module ( PCM ) Learned values
Reset The Exhaust Gas Temperature value
Initialize the Exhaust Gas Related component
Reset Keep Alive Memory ( KAM )
Reset the Diesel Particulate Filter ( DPF ) Learned Values
Reset the Water in Fuel ( WIF ) Warning Indicator
Reset the Knock Sensor Learned Values
Reset the Fuel Metering Valve Learned Values
Reset the Intake Air Throttle Valve Learned Values
Reset the Exhaust Gas Recirculation ( EGR ) Valve Learned Values
Reset the Differential Pressure Sensor Learned Values
Fuel Injector Correction Factors
Relearn Vehicle Data
Reset the Mass Air Flow ( MAF ) Sensor Learned Values
Reset the Fuel Pressure Relief Valve Open Count Learned Value
Reset the Fuel Pressure Relief Valve Open Duration Learned Value

 

5 Item(s)

 ABRITES Diagnostics for Ford is a software for diagnostics of Ford and Mazda vehicles over CAN bus. It provides abilities for IN code calculations, key programming and cluster calibration.

Standard diagnostic functions:

For all electronic control units reading identification data

For all electronic control units read error (DTCs)

 For all electronic control units clear error (DTCs)

Device scan

Data Display / Measured values

Fuel Injector Correction Factors

Speed Limiter - Modify dealer set speed on Ford Transit MK6(2000-2006) and MK7(2006+)

Set RPM Controller mode and associated engine speed - Ford Transit MK6(2000-2006) and MK7(2006+)

Programmable Module Installation - With PMI you can safety to replace original ECU with used or new one. PMI transfers internal data from original ECU to replacement one. If original ECU is not available, you can obtain data from Ford Global database.

Ford/Mazda PCM Read/Write flash memory:
- EDC16C3 - 1.4/1.6 TDCI
- EDC16C34 - 1.4/1.6 TDCI
- SID804 - 1.8/2.0 TDCI
- SID206 - 1.8/2.0 TDCI
- Denso 1MB - Mazda 5/6 - 2.0D

Service functions:
Reset The Powertrain COntrol module ( PCM ) Learned values
Reset The Exhaust Gas Temperature value
Initialize the Exhaust Gas Related component
Reset Keep Alive Memory ( KAM )
Reset the Diesel Particulate Filter ( DPF ) Learned Values
Reset the Water in Fuel ( WIF ) Warning Indicator
Reset the Knock Sensor Learned Values
Reset the Fuel Metering Valve Learned Values
Reset the Intake Air Throttle Valve Learned Values
Reset the Exhaust Gas Recirculation ( EGR ) Valve Learned Values
Reset the Differential Pressure Sensor Learned Values
Fuel Injector Correction Factors
Relearn Vehicle Data
Reset the Mass Air Flow ( MAF ) Sensor Learned Values
Reset the Fuel Pressure Relief Valve Open Count Learned Value
Reset the Fuel Pressure Relief Valve Open Duration Learned Value