MN032 DAS Manager for FBS3/4 Cars
Overview
- W202/W208/W210
- W203/W209/W211/W219
- W168/W245
- W220/W215/R230
- W204/W207/W212/W218
- W221/W216/W251/W164/X164
- W169/W246/W117
- W166/X166
Login for pricing
In stock
Details
MN032 is a world leader in terms of Mercedes-Benz vehicles module replacement, key and remote programming, both for new and used control units.
FBS4 functionalities
Reset of FBS4 Engine control units to virgin state
Read the personalization data from a FBS4 ECU and saving it to a file for future use
Program personalization data from a previously saved file to a FBS4 ECU
FBS4 ECU Activation
Currently supported ECUs (produced until MY2020):
CR40 (EDC17C43)
CR41 (EDC17C66)
CR42 (EDC17CP46)
CR43 (EDC17CP60)
CR6 (EDC17CP10)
CR60 (EDC17CP46)
CR61 (EDC17CP57)
MED40 (MED17.7.1 and MED17.7.2)
MED177 (MED17.7.3, MED17.7.5, MED17.7.8)
CRD3
CRD3H
CRD3S2
VGS-NAG2 FBS4 Transmission control units are also supported for renewal.
The newly added modules include:
• ECU CRR1 (SID307) and CRR1+(SID310) – Done completely by OBD.
• ECU MRD1, MRG1 (manufactured up to 2021) – Bench connection using ZN051 Distribution box and EP003 are required.
• ECU CRR2 (MD1CS006) – Bench connection using ZN051 Distribution box and EP003 are required.
• ECU MED41 (MED17.7.7) – Bench connection using ZN051 Distribution box and EP003 are required.
• Transmission Control Unit VGSNAG3 (9-Gear) - Bench connection using ZN051 Distribution box and EP003 are required.
• Transmission Control Unit VGS2-FDCT (Dual Clutch Transmission)- Bench connection using ZN051 Distribution box and EP003 are required.
• Direct Shift Module (DSM) – ABPROG (ZN030) is required to connect to the module’s microcontroller and read data directly from it to extract the data and use it with the Abrites software.
FBS3 functionalities
Module replacement
Service password reading
Read/Save/Update FBS Data
Transfer FBS Data to a replacement unit
Make each DAS/FBS module virgin, personalise and activate it
Read/Save/Update Coding (the only way to avoid online SCN coding)
Transfer Coding to a replacement unit
Key programming:
Easily extract the EZS/EIS key password
Program all types of DAS2 keys
Program Infra Red keys to DAS3 (FBS3)
Enable and disable key positions
Supported Models:
W202/W208/W210
W203/W209/W211/W219
W169/W245
W220/W215/R230
W204/W207/W212/W218
W221/W216/W251/W164/X164
W176/W246/W242/W117
W166/X166
Supported Modules are all DAS related modules
ECUs
TCUs (7G-Tronic)
ISM
DSM
ESL/EZS
EIS/ELV
Other features:
Program the Abrites Emulators for Mercedes vehicles (EM001, EM004, EM005, EM008, EM009, EM012, EM014)
Reset the mileage of any supported EZS/EIS.
Additional and required tools:
ZN051 Abrites Distribution Box
ZN002 Abrites PROTAG programmer
ZN030 Abrites ABPROG
The ZN076 is highly reccomended for faster reading information from the EZS/EIS of Mercedes-Benz vehicles with IR locks.
N.B. Please note that you will require an AVDI interface with an active Assist plan in order to use this special function.
